£89.99

The center frame is constructed with carbon fibre sheets and hollow carbon rods act as the support booms. This provides strength while keeping the overall weight low. The carbon fibrer support booms lead to the robust CNC aluminium motor housings that house four 720KV brushless motors. The brushless motors are supported by four 18 amp Detrum brushless electronic speed controllers and allow the motors to turn the 10x4.5 rotor blades. The Quadcopter almost ready to fly version comes equipped out of the box with motors and speed controllers pre-installed. A flight control board and battery is necessary to complete this quad build while Dynam pre-tins a circuit board for quick installation. An MWC board will allow fine tuning of the machines capabilities and flying characteristics while a KK board will make installation and setup easier. Either flight control boards are recommended for this type of build.

Required to Fly:
Assembly of Props

Recommended Electronics to Complete Build:
Flight Control Board
6 Channel Transmitter
6 Channel Receiver
Battery 11.1v min of 2200mah 20C

We do not charge for delivery in the UK.
find out more

£95.99

This kit will build the X-450 CCPM Helicopter.
The main shaft assembly is complete and in metal as is the tail assembly.
Metal frame i.
See extended details for full spec.

We stock a full set of replacement parts for this helicopter

Our price includes postage
find out more

£2.39

Belt CP2 CPX CP-CX
find out more

£39.99

Special offer !!!
Lightweight aluminum frame
Adjustable pitch system
3D efficiency wooden main rotor blade
Autorotation System
Price includes Metal Hub and Aluminium Seesaw.

Our price includes postage
find out more

£4.99

cp
Old number KDS-1043A2 Ball Linkage Rod Set
find out more

£3.99

find out more

£3.09

T-plug fm to XT60 fm
find out more

£4.09

cp
find out more

£4.09

find out more

£8.09

325mm Main Rotor Blade
find out more

£89.99

The center frame is constructed with carbon fibre sheets and hollow carbon rods act as the support booms. This provides strength while keeping the overall weight low. The carbon fibrer support booms lead to the robust CNC aluminium motor housings that house four 720KV brushless motors. The brushless motors are supported by four 18 amp Detrum brushless electronic speed controllers and allow the motors to turn the 10x4.5 rotor blades. The Quadcopter almost ready to fly version comes equipped out of the box with motors and speed controllers pre-installed. A flight control board and battery is necessary to complete this quad build while Dynam pre-tins a circuit board for quick installation. An MWC board will allow fine tuning of the machines capabilities and flying characteristics while a KK board will make installation and setup easier. Either flight control boards are recommended for this type of build.

Required to Fly:
Assembly of Props

Recommended Electronics to Complete Build:
Flight Control Board
6 Channel Transmitter
6 Channel Receiver
Battery 11.1v min of 2200mah 20C

We do not charge for delivery in the UK.
find out more

£79.99

The frame is constructed with .5 in box aluminium mated with G10 composite legs and main frame. The G10 legs house the motors and have a clever spring loaded actuation that allows the legs to compress while landing. This is especially useful when landing on uneven surfaces or dampening harder landings to prevent shock and damage to the electronics. The Quadcopter almost ready to fly version comes with four 700KV motors with 2812 stators installed. Four 18 amp dynam brushless speed controllers are pre-soldered to the main board. The main board is also pre-tinned to readily accept a flight control board of your choice. 11x4.7 propellers are also included to provide ample thrust and performance.
Required to Fly:
Assembly of Props
Flight Control Board
6 Channel Transmitter
6 Channel Receiver
Battery 11.1v min 2200mah 20C
3cell Balance Charger

find out more

£3.09

T-plug fm to XT60 fm
find out more